fiver_laser_machines_20_watt_Mahoney_final
bitcoin and ham
20_watt_Mahoney_CO2_laser_power_meter_probe_collage_x2_Mahoney

The Mahoney brand CO2/Fiber Laser Power Meter Probe 20 watts for Laser Engraving Cutting Machines (10.6 to 1.06 microns)- International Shipping Available.

The power meter probe can easily pay for itself with just one or several uses.
Examples include:
(1) Receive in-warranty replacement of bad glass CO2 laser tubes from Chinese laser machine manufacturer.
(2) Note laser tube degradation over time to adjust laser machine power settings to ensure laserable materials are not ruined.

The probe measures laser power for YAG (900-1250 nm) and CO2 (8-11 microns). Works for laser technologies including CO2 lasers, fiber lasers, YAG lamp lasers, diode end pumped lasers, and diode side pumped lasers.

Each probe is fully tested, calibrated, and each probe has an engraved serial number.

Comes with instructions and convenient storage container.

ONE YEAR FULL WARRANTY FOR MANUFACTURER DEFECTS.

Mahoney CO2/Fiber Laser Power Probe 0-20 watts

 

SKU: 1S-DB9L-AQDK

$95.00

A useful device for Laser Markers:

Compatibility

  • This product is great for owners of laser marking machines that contain fiber lasers or YAG/YLF/YV04 laser sources, end-pumped diode lasers and side pumped diode lasers, and other lasing crystals as well between 0.1 microns and 15 microns.  The measurement is in continuous wave to determine average output power.

  • Also terrific for owners of CO2 glass tube lasers with gratings that are powered at 20 watts and below.

  • It works with laser sources as specified above, manufactured by IPG Photonics, SPI lasers, Nufern lasers, and Rofin lasers.  And, it works with the new Chinese made fiber lasers.   A   

  • Ideal for laser marking machines made by Rofin, Telesis, Videojet, Keyence, Panasonic, LMT, Tykma, Diagraph, Electrox and Mecco--just to name a few. 

  • Get your quick laser power output reading today and exercise your warranty as needed.

  • Ensure the best quality for the laser marking now.

 

Mahoney CO2 Laser Power Probe Customer Reviews

5.0 out of 5 stars.  A good CO2 power meter.  By A Y Van Heugten on July 14, 2014.  Very reliable. Less complex than a digital device, but does the job well. You have to wait a few minutes between readings, but that's a small price to pay for the the considerably lower cost of this item compared to digital meters.

 

5.0 out of 5 stars. Does exactly what is supposed to. By danielvwnwieringen on July 7, 2014.  Does exactly what is supposed to. A great way to accurately line up the mirrors. Shipped and Received quickly.

 

4.0 out of 5 stars. Differential temperature testing. By PatrickK on October 20, 2015.  Worked when used as directed, slightly tricky getting back to ambient temperature if using more than once using the "Cold water" technique as took a while to settle at new temperature. Adjustment quite stiff but overall gave good results.

 

5.0 out of 5 stars. Must buy for novice user.  By P. Minke on July 30, 2014.  Simple, accurate and a must have for setting up and understanding the operation of CO2 laser. Especially if you bought a cheap Chinese model.

 

5.0 out of 5 stars. Works great! Easy to use.  By James Graham on April 15, 2015.  Works great! Easy to use! Bought this to check out my 10 year old Epilog Helix 45, still running at 42 after 10 yrs.

 

5.0 out of 5 stars. Five Stars.  By Richard G. on September 24, 2015.  Great product as advertised.

 

5.0 out of 5 stars. Five Stars. By Daniel ROBERT on November 24, 2015.  Very good for the prise.

 

5.0 out of 5 stars. Five Stars.  By Randy Berry on September 24, 2014.  Excellent tool.

Customers who viewed this item, also viewed

 

Click to see: CO2/YAG Laser Power Meter Probe 200 watts

Indepth product information, videos, and more.

 

Click for Video: Mahoney Laser Power Meter Probe Locating a Bad Mirror on a CO2 Laser Engraving/Cutting Machine.  The Mahoney laser power meter probe is utilized to locate bad optics. Maximum CO2 Laser output power is measured before and after each mirror. In this video, the final mirror is measured and found to be bad. The mirror absorbs roughly 9 percent of the laser energy. In general, mirrors are expected to absorb less than 3%.

 

Click for Video:  How my Mahoney 200 watt CO2 Laser Power Probe saved me thousands and stopped a fake seller.  The video provides a sample demonstration of the Mahoney laser power probe, and describes how it saved me from a fake seller of CO2 laser tubes. 

 

Click for Instructable: How to test and set a Chinese (China) made CO2 Laser Power Supply to get long life from your CO2 Laser Tube for your Laser Engraving and Laser Cutting Machine System. Includes an online instruction set, or a downloadable pdf for Instructable members.

 

The market leaders implement measured laser power for material settings. Must know laser power to implement material settings effectively:

(1) Universal Laser Systems referenced materials:  Click for document: Materials Settings for ULS M360 and V460. Shows table with laser output power as first setting.

(2) Epilog Laser.  Click for document Epilog Laser Fusion Materials Settings.  Table contains columns showing laser output power.

(3) Trotec Laser.  Click for Rowmark settings for measured 60 watt output Trotec Laser.  

(4) Laserbits for all major brands.  Click for webpage to Laserbits Laser Settings promoted for Laser University.  Requires knowledge of laser output power.

 

 

Major competitiors:  

(1) Click for pricing Synrad Power Wizard 250 sold by Laserbits

(2) Click for pricing Macken Instruments 100 watt probe sold by Cascade Laser

(3) Click to see Gentech Pronto 250 sold by General Microtechnology and Photonics

 

Click for Bell Laser website with product description.

Order Now!

© 2009-2020 Bell Laser - All Rights Reserved

 

 

 

 

 

 

 

Cookies Privacy Statement: We use google analytics for cookies retention. If you do not want this then leave the site or opt out with the active link below--disables cookies with  google analytics from this site.

 

 EU required special cookies page here.

 

Opt out of Google Analytics Cookies with this link

 

 

Wesbite Designed by Monique Horsman Designs

 CONTACT US 

  • Google+ Social Icon
  • b-facebook
  • Twitter Round